Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.
Verdictvapors

How you can Replace the Blade on a Porter Cable Cookie Joiner

Some of us use our biscuit joiner daily, others on a weekly or monthly basis, but , no matter your frequency of use, eventually, you will need to change its knife. A sharp blade keeps your joiner fast, efficient and precise and when their power tools have these qualities, usually the crafter behind it does too. Fortunately for us crafters, then, replacing the knife on the Porter Cable biscuit joiner is a relatively simple process. Despite a slightly more complicated chip deflector and lock flag, changing your Porter Cable biscuit joiner blade requires little more than a few minutes, a screwdriver and an Allen wrench.

Since with all power tool repair procedures, the first step in changing your joiner blade is disengaging and unplugging the tool. Next, simply flip the tool over and ease the screws in the bottom plate. Your Porter Cable biscuit joiner should have four screws also because this tool also features tapered screw holes, you will not need to completely remove the screws to remove the dish; instead you can simply slide the plate off (slide the plate towards the butt of the tool and lift to remove). This specific, of course , gives you access to the blade.
Image result for biscuit-joiners
Wait! Before grabbing at the blade, though, you must depress the lock pin. The lock 9 reviews pin on Porter Cable biscuit joiners is at the most notable front of the tool (more-or-less) beneath the handle. Pressing this pin prevents the blade from spinning allowing users to safely remove it. The key, though, is that the lock pin must be depressed constantly as you remove the blade and that the blade must be removed with an Allen wrench tool. So, while depressing the locking pin with your secondary hand, use your primary hand to insert your Allen wrench into the middle of the blade bolt, loosen and eliminate it. Carefully remove the blade.

Immediately beneath the blade, the Porter Cable biscuit joiner has an adjustable chip deflector. This mechanism allows the tool to accommodate both standard sized blades and smaller face-frame blades. Based after the size of the new blade you've put on to the joiner, you may now need to modify the chip deflector. With regard to standard sized blades, this swiveling mechanism should remain in the horizontal (left - right) position (or, more-or-less parallel to the directional arrow stamped above it). If, however, you installed a smaller cutting tool, you will need to pull the engine forward to release it and shift the chip deflector to a vertical position (so that it now points to the front of the tool and crisscrosses with that directional arrow).

Next, you must install the new joiner blade. The knife will have a similar directional arrow printed on the surface. This gazelle is designed to ensure users install the knife having its teeth facing the right direction. Install the blade so that its arrow points in the same direction as the directional arrow on the tool. Pop the cutting tool into place and and replace the washer and bolt. While depressing the lock pin tighten the bolt over the cutting tool.

After securing the knife, you need only slip underneath plate back into place and tighten down the four screws that keep it there. That is certainly exactly that. Give your pat on the back again and know that your Porter Cable biscuit joiner is now of the same quality to go as you are.

Joining M&M Tool and Machinery and ToolsandMachinery. possuindo in December of 2006, Mallory has refined the woman expertise in power tool elements, tool repair and many other aspects of the woodworking and production industries. Her hands-on experience with woodworking equipment, power tools and strength tool parts ensure the woman knowledge is current, and her solid relationships with major factory representatives and M&M's own staff of experienced crafters and techs ensure her wit and info remain sharp. - Offering the most thorough inventory of power tools, replacement parts, machinery and accessories, ToolsandMachinery. com is the ultimate resource for your woodworking, crafting, DIY, and construction needs.

Don't be the product, buy the product!

Schweinderl